阿坝干式变压器：防误闭锁装置的使用和管理

防误闭锁装置的使用和管理 　　
防误闭锁装置在使用中应注意以下问题:
1)运行人员必须熟悉联系人：陈经理所配置的各种防误闭锁装置的结构、原理和所具备的功能，熟练掌握其正确的使用方法。
2)操作时，应将防误装置按闭锁装置按要求投入使用，进行操作。
3)操作中遇到闭锁装置不开放时，应停止操作，应进行如下的检查：
①是否走错间隔，操作设备是否有误.有无误操作.
②检查阿坝干式变压器有无问题，如开(断)状态是否正常、倒母线时母联阿坝干式变压器是否合上等。
③检查操作步骤是否正确，与当时的运行方式对照，是否相符。确因电气闭锁装置本身有缺陷需要解锁操作时，应经负责人同意。
4)防误闭锁装置使用的专用钥匙(包括紧急解锁钥匙)应妥善保管，不得随意乱放和丢失。
5）对防误闭锁装置应加强运行维护，户外闭锁装置应定期加油，防止生诱，装置故障或损坏后，应及时修复，尽快投入使用。

Error prevention and management of the use of locking devices

Anti-locking device in use error should note the following issues:
1) The operating personnel must be familiar with the configuration of the various anti-mislock device structure, principle and of the capabilities, master the correct use.
2) operation, the device should prevent misuse by locking device as required in use, to operate.
3) The operation encountered locking device is传 真：0635-8888109 not open, they should stop the operation, the inspection should be carried out as follows:
① is wrong interval, operation of equipment is wrong. Whether the mistake.
② Check the circuit breaker for problems, such as open (off) state is normal, down the bus when the bus coupler circuit breaker is fine together.
③ Check the steps correctly, and then the operation mode control, are consistent. Indeed due to defective electrical locking device itself need to unlock the operation should be agreed by the responsible person.
4) Anti-error to use a special key locking device (including emergency unlocking key) should be properly kept, are not free to leave around and lost.
5) misuse of anti-locking device should enhance operation and maintenance, outdoor locking device should be regularly refuel, prevent health induced, after a device failure or damage, should be repaired as soon as possible put into use.