正确检测巴音郭楞干式变压器故障的方法是什么？

巴音郭楞干式变压器">正确检测巴音郭楞干式变压器故障的方法是什么？

What is t干式变压器厂he correct method to detect the fault of the mine switch cabinet?

巴音郭楞干式变压器提醒由于不同的巴音郭楞干式变压器，它的元部件数据也不相同；而且由于特性的不同，产生的数据也不相同，比如说在工作当中是一个数据，当导通一个元部件的时候又是一个新的数据，所以在对巴音郭楞干式变压器进行检测之前，关键是要确定数据的准确性记录。

Guiyang switchgear remind due to different switch cabinets of mine, components of its data is not the same; but because of the different characteristics of the data is not the same, for example in the work is a data, when conducting a component is a new data, before the the mine switch cabinet for testing, the key www.tv2018.comis to determine the accuracy of the data record.

因此在测量的时候，首先要在电位高的地方先进行测量，在检测的时候一定要接通效验指示灯，一旦效验灯出现反应立即对诊断电路进行断电处理，在测量期间蜂鸣器的接通可以提醒检修技师检修电路是否有故障。在检测的过程中一旦出现感应电应该立即停止检修，找到感应电的来源处理后才能继续下一步的检修工作。

Therefore, in the measurement time, the first step is to measure the potential in high places for advanced, at the time of detection must connect the efficacy indicator lamp appeared to respond immediately to check once the diagno干式变压器厂sis of circuit power handling, switch on the buzzer during measurement can remind maintenance technicians and repair the circuit is faulty. In the process of detection, once the induction should be stopped immediately, and the source of induction can be found, the next step will be continued.

之所以如此重视这方面的工作，主要是因为合理的利用检修工具检测巴音郭楞干式变压器，保证诊断故障的准确性的理想处理方式。在不同的元部件的进行诊断故障时，只需要配合不同的诊断工具就能对其进行检修。

The reason why so much attention is paid to this field is mainly due to the rational use of maintenance tools to detect mine switchgear and ensure the accuracy of diagnosis. In the diagnosis of fault of different electrical components, it is only necessary to cooperate with different diagnostic tools to repair it.

通过对不同巴音郭楞干式变压器关键点的测量，可以得到电压数据、电流数据、和元部件本身的数值信息，而数值以及数据的测量则是依靠万用表等仪表配合完成的。当发现电路当中元部件出现数据异常的时候，基本上就可以确定故障的准确性了。

By measuring the key points of different switch cabinets, we can get voltage data, current data, and numerical information of the components themselves, and the measurement of data and data is done by means of multimeter and other instruments. When the data is found to be abnormal in the component parts of the circuit, the accuracy of the fault can be determined.