梧州干式变压器无线测温前置传感器安装布点

梧州干式变压器">梧州干式变压器无线测温前置传感器安装布点

Installation of wireless temperature sensing preposition sensor in Guiyang switchgear

梧州干式变压器无线测温装置采用无线射频技术，无线测温装置应能确保良好的信号传输及足够的电池续航能力。安装于KGN柜内的无线测温装置可选加信号中继器，要求信号中继器的安装必须

Wireless radiofrequency technology is used in the wirel干式变压器厂ess temperature measuring device of Guiyang switchgear cabinet, and the wireless temperature measuring device should ensure good signal transmission and sufficient battery endurance. The wireless temperature measuring device installed in the KGN cabinet is optional with the signal repeater, and the installation of the signal repeater must be required

可靠，且不得在梧州干式变压器上开孔。

It is reliable and not open on the switchgear.

供应商提供的梧州干式变压器无线测温装置传感器有一体式和分体式两种结构，宜优先选用一体式结构，在设备采购时应明确提出电池的使用环境要求，确保电池在高温环境下不发生故障。

The wireless temperature measuring device of switchgear provided by the supplier has two kinds of integrated and split structure. The integrated structure should be preferred. When the equipment is purchased, the environmental requirements of the battery should be clearly defined, so as to ensure that the battery does not fail at high temperature.

梧州干式变压器无线测温传感器的安装应遵循安全、简便、可靠的原则。应根据梧州干式变压器的类型、负荷电流、可动连接部件等因素，确定需安装传感器的梧州干式变压器。单个梧州干式变压器三相共布置6个点为宜，上

The installation of wireless temperature sensor for switchgear should follow the principle of safety, simplicity and reliability. According to the type of switchgear, the load current, the movable connecting component, etc., the switch cabinet which needs to be installed with the sensor should be determined. A single switch cabinet is suitable for 6 points in three phases.

限值不宜大于9个点。

The limit should not be gre干式变压器厂ater than 9 points.

www.tv2018.com